Kramer Electronics - New releases

TBUS-4 - Architectural Table Mount Interface

The Kramer TBUS-4 is a high quality anodized aluminum finished table-mount interface system for boardrooms and conference rooms. Its attractive enclosure is designed to provide maximum connectivity in the smallest possible footprint.

TBUS-3 - Architectural Table Mount Interface

The Kramer TBUS-3 is a high quality anodized aluminum finished table-mount Interface system for boardrooms and conference rooms. Its attractive enclosure is designed to provide maximum connectivity in the smallest possible footprint.

VP-434 - ProScale™ Component & Computer Graphics Video & Stereo Audio to HDMI Scaler & Audio embedder

The VP-434 is a high performance scaler for component video and computer graphics video with unbalanced stereo audio signals. The unit scales component or computer graphics video and embeds unbalanced stereo audio to the HDMI output.

VM-20HD - Dual 1:10 Multi-Mode HD-SDI & SDI Distribution Amplifier

The VM-20HD is a high performance distribution amplifier for SDI (SMPTE 259M and SMPTE 344M) and HD-SDI (SMPTE 292M) signals. The unit can be configured as 1:20 or two 1:10 distribution amplifiers.

VP-727XL - 8x2:3 In-CTRL™ Dual Scaler Seamless Switcher

The VP-727xl In-CTRL™ Dual Scaler Seamless Switcher is a true multi-standard video to graphics scaler and seamless switcher with 8 universal inputs comprised of 5 BNCs each of which can accommodate a composite video, s-Video (Y/C), component video (RGB/YUV), RGBS, or RGBHV signal. Inputs 1 and 2 also can be configured to HDMI inputs. The unit has dual scalers, one for the preview and the other for the program output. Dual scalers are required to do “True” seamless transitions from one source to another.

VA-14 - 4-Channel Balanced Audio Mixer

The VA-14 is a high performance 4-channel mixer for mono balanced audio signals on XLR connectors. The unit inputs 4 channels of any combination of balanced, line or microphone level audio signals, and outputs to 2 balanced mixed audio outputs and a headphone signal output.

C-HDMI/HDMI/FLAT - Flat HDMI Cable

Kramer’s flat HDMI cable is designed for “invisible” and long distance installations.
Go through the wall, under the carpet, around corners and behind the entertainment system with ease. The flat design of the cables renders them unobtrusive.

Quality Construction - Constructed from flexible flat cable structured to have less crosstalk and interference than with traditional round HDMI cables.
High Quality Connectors - Gold plated connectors resist corrosion, cut down on impedance and offer the best possible connectivity.
High Resolution - the cables are capable of carrying extremely high bandwidth signals, including 1080p over longer runs than conventional designs, without signal degradation.

AD-HF/HF - HDMI Female to Female

Kramer's AD-HF/HF is Adapter for HDMI Female to Female

AD-DF/HM - DVI Female to HDMI Male

Kramer's AD-DF/HM is Adapter for DVI Female to HDMI Male

AD-DM/GF - DVI-I Male to 15-pin HD Female

Kramer's AD-DM/GF is Adapter for DVI-I Male to 15-pin HD Female

C-XLM/XLF - XLR Cable

Balanced audio connections are extremely important in sound recording and production
because they allow for the use of cables with reduced introduction of outside noise.
Kramer’s XLR cables allow you to connect your professional and high-end audio equipment.

Quality construction - Constructed using flexible stranded 18 AWG wires terminated with high quality XLR connectors.
Outer diameter - 6.0mm.

C-AFDM/AFDM - Optical All Fiber DVI Cable

Kramer’s All Fiber DVI cable system is constructed of high performance fiber optic cable with DVI-D connectors on each end. They are designed to transmit DVI-D signals extremely long distances with pristine digital image quality.

Fiber Optic Converters Built-in - A Kramer C-AFDM/AFDM has converters built into DVI-D connectors on both ends of the cable. The transmitter (connected to the source) converts DVI into fiber-optic light pulses which can travel much greater distances than traditional copper-based systems, and the receiver converts back to DVI-D for connection to a display or other receiving device.
Quality Construction - 8 fiber strands: four for DDC/HDCP interconnection and four for red, green, blue and clock transmission.
Numerous Applications - Integration of digital display systems for medical, military aerospace, factory automation and traffic control platforms. Flat panel display, plasma display panel and projector installation in conference rooms, auditoriums and for kiosk systems. LED signboards for large scale information display and stadiums.
High Resolution - Compatible with all HDTV standards up to 1080p and all VESA resolutions up to UXGA (1600x1200) at 60Hz refresh rate with 1 pixel/clock mode.
Zero EMI - Does not emit any cable electromagnetic interference or emission, making it suitable for any medical or other EMI sensitive environment.
Flexible Power Options - Tx can use either DC power from the graphic card or AC/DC power from an external +5V adapter, Rx requires external power (supplied).
HDCP Compliant - AFDM cables are also compatible with the HDMI Interface standard and are HDCP compliant.

Ordering Information: This cable is offered in a “built-to-order” fashion, which offers quick construction and delivery in the exact length required. Order any length from 164 feet to 1640 feet (50 meters to 500 meters). C-AFDM/AFDM (one foot) (order the number unit = number of foot you need). For requirements ranging from 10 to 100 meters, see also Kramer’s FODM series hybrid (fiber/copper) DVI-D cables.